Sale!

Dynamo 4810

Original price was: R56,300.00.Current price is: R50,650.00.

The Load Shredder Dynamo 4810 is one of our premium level batteries for home and business use. This is a 48-volt based system, perfectly matched to a larger energy requirement.

The Dynamo 4810 is a 48-volt 10.2kWh floor-standing battery

6000 Cycles

Smart BMS, compatible with 95% mainstream inverters

10-year warranty on cells

A-grade barcoded cells

Availability: 68 in stock

The Load Shredder Dynamo 4810 is one of our premium level Lithium-ion/Lithium-iron (LiFePO4) batteries for home and business use. This is a 48-volt based system, perfectly matched to a larger energy requirement in response to load shedding. It can be stacked ten times to cater for the largest workloads. 

The cells are A-Grade Energy Storage System prismatic cells from one of the world leaders in prismatic cells. These cells are computer matched for the longest life. The intelligent BMS communicates with 95% of the world’s inverters and balances the cells throughout their lifespan. 

The shell is made of a high-Quality Aluminium Magnesium alloy and is anti-corrosive and durable. It is dustproof and designed to last many years.

Nominal Capacity 200Ah
Nominal Voltage 48V (51.2V)
Capacity(kWh) 10.240kWh
Input
Full Charge Voltage 56V-60V
Maximum Charging Voltage 90V
Input Voltage Range 60V-100V
Continuously Use Input Current 100A
Maximum Solar Panel Input Current 100A
Output
Continuously Use Output Current 100A
Discharge Cut-off Voltage 38V-48V
Over-Discharge Delay Protection 1000ms
Short Circuit Protection Delay 300us
Short Circuit Protection Recovery Disconnect load
Cell type LiFePO4 Battery/LFP Barcoded Grade-A Cells
Storage temperature range Short-Term -20℃-40℃ (Within 1 month) Long-term 10℃-35℃ (Within 1 year)
Operating temperature range -15℃-60℃
Recommended temperature range 10℃-40℃
Self-Discharge (25°) <3%/Month
Depth of discharge >80%
C-rate Discharge <0.8C
Cycle Life >6000Time(<0.5C)
Certification Standards UN38.3/CE/MSDS/DGM
Warranty 5 years on hardware, 10 years on cells
Communication RS485
Product Size 614±2×507±2×212±2mm
Packaging Size 668±2×645±2×713±2mm

Dynamo 4810 4815 specifications document

1. The following is a formal warranty policy for the Load Shredder Lithium-ion batteries and accessory components sold by Load Shredder Pty Ltd. to end-users through authorized resellers:

2. Purpose:
a. This Warranty serves to clearly define the matters related to the warranty policy of Products.

3. Warranty Condition:
a. Warranty Period:
i. The Performance Warranty for the Products is valid for 10 years from the initial installation date (the “Term of Performance Warranty”).

b. Limitation of Warranty Scope:
i. Load Shredder’s liability under this Warranty is limited to replacement, repair, refund, and compensation should the device not have a replaceable unit. Replaced or repaired Products shall be warranted for the remainder of the original Term of Performance Warranty. In any event, the replacement shall not justify the renewal of the Term of Performance Warranty.

4. Exclusion of Warranty:
i. Damage to the Products resulting from any of the following activities is not covered by this Limited Warranty:
1. Improper transportation, storage, installation, or wiring by Buyer.
2. Modification, alteration, disassembly, repair, or replacement by someone other than personnel certified by Load Shredder.
3. Noncompliance with Load Shredder’s official installation manual.
4. External influences, including unusual physical or electrical stress (power failure surges, inrush current, lightning, flood, fire, accidental breakage, etc.).
5. Use of an incompatible inverter, rectifier, or PCS.
6. Excessive over-charge or under-discharge of the battery cells. For over-charge (4.4V) and for under-discharge (1.8V). Above or below these thresholds, the cells are deemed permanently damaged.
7. Lack of a Department of Labour certificate on the installation in which the battery and inverter systems are used.

5. Performance Warranty (Standard):
i. Load Shredder warrants and represents that the Product retains at least 60% of Nominal Energy for either 10 years after the date of the initial purchase or for 6000 cycles when the battery system is operated under normal use following the specification and the manual provided by Load Shredder.
ii. The precondition of the valid 10-year Performance Warranty shall be as follows:
1. The ambient temperature during the operation of the Products must not fall below -10°C or exceed 45°C.

6. Out of Warranty Policy:
a. Products damage that is not caused by the seller, Load Shredder, shall provide a charged service, including all expenses such as material cost, labour cost, warehouse cost, transportation cost, customs duties, analysis cost, management cost, corporate profits, disposal expense (if necessary), and so on.

This warranty policy is subject to the South African Consumer Protection Act (CPA) and the South African Consumer Goods and Services Ombudsman (CGSO), and any disputes arising out of or in connection with this policy shall be subject to the exclusive jurisdiction of the South African courts.

Shopping Cart
Scroll to Top
× How can we help you?